To prevent water leaks and guarantee the hygiene of your bathroom, cleaning and maintaining the seals is essential. Shower, tub and sink seals help maintain watertightness and fight moisture. Unfortunately, over time the seams can darken and show mildew spots. In addition, re-grouting the bathroom can be a costly and time-consuming process. To help you clean the silicone seals in your bathroom and eliminate mold, here is a formidable trick.
Redoing the silicone seal of a shower or a sink can be a complex task if you are not used to DIY. Fortunately, some tips can effectively remove dirt, mold and residue that can damage seals. To give a boost to your bathroom, here is a method to clean a silicone seal and remove encrusted black stains.
A tip for removing mold from a silicone gasket
Among the many household products that can be used in many ways, we find white vinegar . This ingredient, free of chemicals, can both clean dirty objects, whiten, disinfect and descale various surfaces. Ideal for shining the bathroom or removing limestone, this natural product is formidable for removing mold that appears on the joints of the tiles of the bathtub or the shower.
Vinegar can disinfect and clean various surfaces – Source: spm
To carry out a cleaning of the joints, you will need:
- 2 cups white vinegar
- ½ cup dishwashing liquid
Start by pouring the white vinegar into a container, then add the dishwashing liquid and mix everything until you obtain a homogeneous liquid. Then use a sponge to scrub and remove the mildew stain.
White vinegar to remove traces of mold – Source: spm
Leave on for 20 minutes then use an old toothbrush to scrub more and remove all encrusted traces.
Other tips for cleaning silicone joints
To clean silicone gaskets, remove dirt and prevent mold growth, there are other eco-friendly ingredients you can use:
- black soap
Liquid black soap – Source: spm
Black soap can make your bathroom shine and fight bad odors linked to excess humidity. Pour a little liquid black soap on an old toothbrush and vigorously rub the silicone seals to clean them.
Leave on for 15 minutes then rinse with lukewarm water and use a microfiber cloth to dry your joints.
- Baking soda
Baking soda has whitening and sanitizing properties and remains an indispensable product for cleaning. To clean your silicone joints, mix 3 tablespoons of baking soda with 3 tablespoons of white vinegar. Dampen an old toothbrush with this solution and gently scrub your joints.
Baking soda has many virtues – Source: spm
Leave on for 10 minutes before rinsing off with lukewarm water. Use a dry cloth to wipe down your joints.
- The clay stone
The clay stone is one of the grandmother’s tricks that promote ecological and practical cleaning. To shine your silicone joints, use a brush soaked in clay to scrub each joint. Leave the product to act for ten minutes then rinse with lukewarm water. Using a dry sponge, remove excess moisture.
