Over time, the tiles in the kitchen, bathroom, or any other surface in the house can lose their shine and collect dirt. Difficult to clean, this floor or wall tile resists the effects of humidity. In fact, it could have stubborn stains from mold, rust, or scale. Often, when you clean the tiles, you realize that the most complex areas to scrub and sanitize are the joints. They may turn black and show mold. However, there are natural ways to clean tile joints and make them shine.
Some natural products are terribly effective for home maintenance. After washing your kitchen or bathroom tiles, you can do what you can to restore the shine of the grout. To clean and polish tile joints without using chemical products, here is a list of ecological and practical household products.
What products are commonly used to clean tile joints?
Joint cleaning – Source: spm
To remove dirt and debris stuck to tile joints, many people use two household essentials:
-
Bleach
Bleach is considered an irreplaceable cleaner to whiten, sanitize and disinfect various surfaces. To restore blackened gaskets to their original colour, simply mix a layer of bleach with a quart of warm or hot water and then scrub the gaskets with a brush. But even though this product is effective, it can damage tile joints if used frequently.
-
dishwashing liquid
Primarily used to clean and degrease pots and pans, dish soap has a variety of other uses. To clean tile joints, simply mix dish detergent with water and then pour the mixture over the joints. Then you have to let it act for a few minutes before rubbing with a toothbrush to polish the joints. For optimal efficiency, some people add lemon juice or white vinegar to remove scale deposits on the tiles.
How to clean tile joints with natural tips?
Some ecological products, in addition to bleach and dishwasher, can clean the joints of the tiles and restore their shine:
-
the clay stone
Cheap and practical, clay stone can be used to eliminate tile joints. This natural stone contains no chemical ingredients and helps keep joints from blackening. Use a damp sponge soaked in clay stone to scrub the tile joints and loosen any dirt. Then rinse with warm water and dry with a dry cloth.
-
White vinegar
White Vinegar – Source: spm
Economical and ecological disinfectant, white vinegar is essential in our kitchens. To clean the tiles, remove mold and polish the joints, spray white vinegar on the joints and leave the product to act for about ten minutes. Scrub with an old toothbrush, then rinse with cold water. Wipe with a dry cloth to remove excess moisture.
-
Meudon white
Considered a true cleaning product, Blanc de Meudon degreases and polishes various surfaces without damaging them. Mix 100 grams of Blanc de Meudon with 5 tablespoons of hot water until you get a kind of paste. Next, spread the product over the joints of the tiles and let it rest for an hour. Finally rub with a sponge and wipe the joints with a clean cloth to remove the product.
-
Sodium bicarbonate
Sodium Bicarbonate – Source: spm
Sodium bicarbonate is a versatile product that lovers of natural tips especially like. If the joints of the tiles tend to blacken, you can opt for this product with whitening properties to clean them. To do this, mix 4 tablespoons of baking soda and 10 centiliters of white vinegar. Then, pour the mixture into a spray bottle and spray the product onto the joints. Leave on for a few hours before scrubbing with an old toothbrush. Rinse and use a dry cloth to dry the tile.
-
black soap
Natural degreaser, black soap allows to degrease the tiles and clean the joints in depth. Its oily base will allow you to clean your damaged joints and make them shine. Apply the black soap to the joints with a slightly damp brush, then rub vigorously to loosen any dirt. Then rinse with warm water and dry with a cloth.
If you like natural makeup, you can learn to clean your entire house with organic products.
